How to replace motorcycle arrows on Triumph Liquid Cooled since 2016
If you have happened on this article, you will surely be wondering
How to install aftermarket motion arrows On your new motorcycle
Triumph liquid cooled.
In this guide we will follow you step by step in the replacement of the original position indicators with Custom Aphromarket motion arrows and in the adjustment of the flashing frequency.
If, once installed, the direction indicators will not work, or the flashing speed will be slow or too fast, follow the following steps to solve the problem.
This guide on "How to mount motorcycle arrows on Triumph Liquid Coled "is aimed at models Triumph:
Street Cup
Street Scrambler
Street Twin
Bonneville t100 liquid
Bonneville T120 / Black
Bonneville Bobber / Nero
Bonneville Speedmaster
Thruxton 1200 / R
-
1 - Make sure the ignition key is in the dull position
-
2 - Press and keep pressing the "I" button on the housing of the left switch
-
3 - holding down the "I" button, insert the ignition. Do not release the "I" button
-
4 - continue to hold down the "I" button Up to display the indicator on the tools "Type " scheduled in the system.
-
5 - release the "I" button
-
6 - Press and release the "I" button Up to select "Type 1-4"
-
7 - To store the new setting, press and hold down the "I" button Until the tools appears on the panel "Type".
-
8 - Check that the front and rear indicators work in the correct way.
If the direction indicators do not work, repeat the Passages 1-7.
With this guide on
How to mount motorcycle arrows on Triumph Liquid Cooled You can easily change the original arrows to your bike by transforming it into a real custom motion.
CLICK HERE For the custom arrows of the Cafe Twin catalog
[Gallery Columns = "4" size = "medium"IDS =" 7103,5135,7200,5011 "]
