How to replace motorcycle indicators on Triumph Liquid Cooled models (from 2016)
Do you want to fit aftermarket motorcycle indicators to your modern Triumph?
In this guide, we explain how to replace the original indicators and, above all, how to solve the most common issue: the incorrect flash rate after installation.
In just a few steps, you can achieve a clean, functional and plug & play result.
Compatible models
This guide applies to Triumph Liquid Cooled models from 2016:
- Street Twin
- Street Cup
- Street Scrambler
- Bonneville T100 (Liquid)
- Bonneville T120 / T120 Black
- Bonneville Bobber / Bobber Black
- Bonneville Speedmaster
- Thruxton 1200 / R
Common issue: indicators flashing too quickly or not working
After installing aftermarket indicators, it may happen that they:
- flash too quickly
- flash too slowly
- do not work properly
It is not a fault: it is simply a matter of electronic configuration.
Procedure for adjusting the flash rate
- Make sure the motorcycle is switched off
- Press and hold the “i” button on the left-hand switchgear
- While holding the button down, switch on the ignition (without releasing it)
- Keep holding it down until “TYPE” appears on the display
- Release the button
- Press the “i” button again to scroll through the TYPE 1 – TYPE 4 options
- Select the correct one for your indicators
- To save, press and hold the “i” button until the display confirms
- Check that the front and rear indicators are working correctly
Practical tip
If the indicators are still not working correctly, repeat the procedure and try another TYPE configuration.
Each aftermarket indicator may require a different setting.
Conclusion
With this procedure, you can easily install custom motorcycle indicators on your Triumph without modifying the electrical system.
A simple upgrade that immediately changes the bike’s look and character.
Discover all compatible motorcycle indicators and transform your Triumph.
